Specification / Gen data about Ashok leyland Stallion Mk - III

Dimension -

Overall Length -7320+_ 50 mm

Overall Width - 2500 mm
Overall Height - 2950+_ 35 mm
Wheel Base - 4500 mm

Chassis -

Length - 7370 mm
Width - 864 mm

For ALS MK-IV click here

Ground Clearance -

Front & Rear - 305 mm

Engine -

Model name - HINO WO 6 DT ( Turbocharged )

Type of engine - 4 stroke, 6 cylinder vertical in line, Over head valve,water cooled, direct injection, turbocharged.

No of Cylinder & its arrangement - 6 cylinder in line.

Bore - 104 mm

Stroke - 113 mm

Cubic Capacity - 5.759 Ltr

Compression Ration - 17.9 : 1

Max BHP - 160 ps at 2400 RPM

Max Torque - 50.5 kg/mtr at 1600 RPM

Engine Oil Capacity - 10.5 Ltrs 20 W 40

Firing Order - 142635

Specification / Gen data about Ashok leyland Stallion Mk - III

Tappet Clearance -

Inlet - 0.30 mm

Exhaust - 0.45 mm

Injection Timing - 20 degree before TDC

Cold starting aids -

(a) Hino motors glow plug 100 watts fitted in cylinder head
(b) CSS electricals sump heater 150 watts

fan belt free play - 18 to 20 mm

Technical data of Royal Enfield Shotgun 650

FIP ( Fuel Injection Pump ) -

Make - Mico
Model - In line inbuilt governor.
Type - Six element type.

Technical specifications of new Mahindra Thar

Clutch -

Make - Rane brake lining Ltd.

Type - Single plate dry disc
diaphragm clutch hydraulic operated type.

Capacity - 1 Ltr

Gear Box -

Make - Ashok Leyland Ltd.

Model - ZF S6-36.

Type - Selective sliding synchromesh.
Gear - 6 forwards & 1 reverse.

Oil Capacity - 6 Ltrs HO 80W90.

Specifications of Royal Enfield Interceptor 650cc

Specifications of Royal Enfield Bullet 350 ES

Specifications of Royal Enfield Meteor 350

Specifications of Royal Enfield Classic 350 Dual Channel

Specifications of Royal Enfield bullet old 350

Auxiliary gear box(Transfer case)

Make - Ashok Leyland ltd.

High gear ratio - 1 : 1.

Low Gear ratio - 2.147 : 1.

Oil capacity - 4.5 Ltrs 80W90.

Operation - Electro pneumatic switch operated from driver cabin.

Type - two speed auxiliary gear box.

Axle Front and rear -

Make - Automotive axle Ltd.

Model - Pressed banjo type.

Type ( front ) - Fully floating pressed banjo type live drive axle with steerable ends.

Type (rear) - Fully floating live axle with differential lock.

Load capacity front - 7.5 Tons.

Load capacity rear - 10 Tons.

Differential gear ratio - 5.833 : 1.

Oil capacity - 13 Ltrs 80W90 each. ( front & rear )

Suspension Front & Rear -

Make - Madras Suspension Pvt Ltd.

Type - Semi elleptic multileaf progressive type.

No of Leaves - 16.

Width - 76 mm

Thickness - 11 mm

Length - 1524 mm.

Spring rate - 26 kg/mm & 32 kg/mm (Front & Rear ).

Shock Absorber Front & Rear -

Make - Armstrong Hydraulic India Ltd.

Fluid to be used - Sealed type.

Type - Double acting.

Wheels -

Rim -

Make - Wheels India.

Type - 3 piece.
Rim size - B 8.00X20.127mm off set.

Bead Lock type - Split Ring type.

No of Studs per Wheel - 10 Studs.

Tyres -

Make - JK Tyres Ltd, MRF Ltd, Bombay tyres.

Size    - 12.00X20 inch.

Ply Rating - 18 ply.

Quantity - 4 fitted and one spare.

Type of tread   - Cross country type.

Load capacity - 4069 Kg.

What is SRS airbag and how does it work

Tyre Pressure -

(i) Unladen -
Front - 65 psi.
Rear - 65 psi.

(ii) Laden 5 Ton -
Front - 94 psi.
Rear   - 94 psi.

(iii) Laden 7.5 Ton -
Front - 105 psi.
Rear -   115 psi.

Brake System -

Service Brake -

Type - Air brake dual line.

Brake lining - Rane brake lining Ltd.

Spring brake chamber : air brake system

Unloader valve : air brake system

Front wheel brake chamber : working

Dual brake valve : construction & working

Relay valve : air brake system

Parking Brake -

Type - pneumatic release from driver cabin.
Location - brake drum on rear axle.

Exhaust brake -

Make - Ashok Leyland Ltd.
Model - Sliding Valve actuating by air pressure.
location - At exhaust pipe after exhaust manifold.

Exhaust brake assembly working

Steering System -

Make - Rane power steering Ltd.

Model - MFB - 64.
Type - Integral Power Steering.
Ratio - 20.4 : 1.
system pressure - 138 kg/cm2.
Oil capacity - 4 ltr GM 24.
( GM = Glexomatic )
Toe in - Parallel.
Caster angle - + 1Degree.
Camber angle - + 1 degree 30 minute.
King pin Inclination - +5 Degree.