Specifications of Royal Enfield classic 350 dual channel

bullet-classic-350-abs

Introduction:-

Every vehicle have different technical characteristics and their have different maintenance. So before using we should have aware about it's technical data and specifications.


Royal Enfield Bikes. 

Classic 350 BS-IV Dual Channel

Classic Bullet 350


Specifications of Classic 350 Dual Channel:-

1. Engine:-

Type of engine - Single cylinder, four stroke, twin spark, air cooled.

Piston displacement - 346 cc. 

Bore - 70 mm. 

Stroke - 90 mm. 

Compression ratio - 8.5:1

Maximum power - 19.8 BHP @ 5250 RPM.

Maximum torque - 28 Nm @ 4000 RPM. 

Ignition system - Transistorised coil ignition system.

Clutch - wet clutch multi plate type.

Gearbox - 5 speed constant mesh.

Fuel supply system - constant vacuum carburettor type.

Air cleaner - paper element type. 

Fuel capacity - 13.5 ltr. 

Engine start - electric and kick.


classic-350


Specifications of Royal Enfield Bullet 350 ES




Dimension:-

Wheel base - 1370 mm. 

Ground clearance - 135 mm. 

Length - 2160 mm. 

Width - 790 mm (without mirror). 

Height - 1090 mm (without mirror). 

Kerb weight - 192 kg. 

Brakes:-

ABS - dual channel. 

Front brake - 280 mm disc with twin piston caliper.

Rear brake - 240 mm disc with single piston caliper.

Electricals:-

Electrical system - 12 volt DC. 

Battery - 12 volt 8 AHC. 

Head lamp - 12 v, H 4-60/ 55w (halogen).

Tail lamp - 12 v, P21/ 5w.

Turn signal lamp - 12 v, 10 w X 4 nos. 

Available Colour:-

Chestnut, Silver, Black, Ash, Redditch Red. 


You may also like this:-👇👇👇