Thermostat valve explanation and type of thermostat valve

thermostat-valve-explanation-and-type


Thermostat valve explanation:-

Thermostat valve is a device that control on the engine working temperature and also helps to maintain the working temperature of the engine fast before moving the vehicle. It control the water flow around the engine. It connected with both the radiator and the water pump. 


Thermostat valve explanation and type of thermostat valve

Type of thermostat valve:-

The thermostat valve is available in basically three type which are mention below:-

1. Bellow type thermostat valve:-

This thermostat valve like as a flexible bellow which is made of brass metal. This bellow filled with some volatile fluids acetone and alcohol because the boiling point of these liquid is between 65°C to 85°C.

2. Wax type thermostat valve:-

This type of thermostat valve have a brass capsule which is connected with stainless steel pin and covered with synthetic rubber boot. This capsule have 0.9 grams micro crystalline Parathin wax. 


Thermostat valve explanation and type of thermostat valve


3. Bi-metal type thermostat valve:-

This type of thermostat valve have a thermal metallic straps and the straps connected with the valve. When temperature increased the strap start expending and the movement goes to the valve and valve make open and close the way of the water to the radiator.

What is thermoayphon


thermoayphon-kya-hai


What is the thermoayphon:-

First of all into a bowl or a jar fill some liquid then give some fire under the bowl. After some time because of the fire the liquid starts getting hot and hot things always lighter than cold so hot water flow upward and cold water flow downward to replace the hot water. After some time this process continue into a bowl and a circulation is take place inside the bowl this circulation is known as thermoayphon. 



You may also like this 👇👇👇👇